This clean tech wave energy plant generates an output of 300kW to power 250 households. An investment of €6.4m was made to the facility, which started to produce energy on July 2011.
The project will help in reducing 600t of carbon emissions annually. Global potential of oceanic wave energy is estimated at 1.8TW, but is largely untapped.
The Mutriku plant is expected to spur similar developments across the world to tap this energy.
Development of the Mutriku plant
Mutriku harbour, which is located in the Bay of Biscay, is regularly hit by strong storms that often cause damage to the piers. The storms also lead to instability and have been known to cause several boat accidents. To address this problem, the Basque Government approved a plan to build a 440m-long detached, rubble mound breakwater facility.
After approving the breakwater project, the Basque Government approached EVE to develop a wave energy plant that will use the breakwater without affecting its primary functions.
Several technologies were examined and Voith Siemens Hydro’s oscillating water column (OWC) technology was chosen because of its simple and non-disruptive design.
Construction of the Mutriku wave energy plant
Construction of the Mutriku power plant began in 2006. The OWC was built on the site of a 100m section of the breakwater facility’s outer wall. The foundation for the plant was laid by digging a trench to a depth of 0.50m, width of 14.25m and length of 102m.
The facility features 16 air chambers made of four open fabricated parts and 12 closed parts. Each part was lifted into place using cranes with a 50t lifting capacity.
Once the parts were in place, submerged concrete was poured to reinforce the entire structure. The chambers were then covered with 80cm-thick prefabricated slabs made of reinforced concrete.
Mutriku plant details
The design of the Mutriku plant includes a hollow structure forming a trapezium shape. The structure has a front opening, which is submerged under water, and an opening at the top.
The front opening is 3.20m high and 4m wide. The hollow structure contains 16 air chambers that house 16 turbines.
Each turbine weighs 1,200kg and is 2.83m high and 1.25m wide. The turbines do not have a gearbox, hydraulics or pitching blades. They are simple, reliable and work with air.
The Wells turbines are connected to a turbo generator with a capacity of 18.5kW. The turbo generator features a butterfly valve at the bottom to isolate it if necessary. Fresh water injectors clean the blades of the turbo generator to remove accumulations of salt and other impurities.
The plant also includes control and power conditioning equipment, a transformer centre and a power take-off line.
OWC technology at the Mutriku wave energy plant
The OWC technology used at the Mutriku plant is provided by Voith Siemens Hydro subsidiary Wavegen. The technology has been tested in a demonstration plant in Scotland since 2000 and was launched commercially with the new facility.
The technology can be used in existing or new breakwater structures. The innovative concept enables the existing marine infrastructure to be used for generating power, thereby minimising construction costs.
Sea water enters the air chambers of the breakwater facility through the opening at the front. When water enters the chambers, the air present is compressed at high pressure and pushed out the opening at the top.
This high pressure air turns the turbine, which is connected to the generator, thereby producing electricity.
When the water recedes, the air is decompressed, which again turns the turbine.
The sea water never comes in contact with the turbines. Electricity is generated only with the movement of air. This feature greatly improves the life of the equipment.
Only registered users can send comments.
It's free and it takes only a few seconds!